4.2.1 Power supply specifications AC220V 50HZ stable voltage 220V±5%

4.2.2 Equipment power 2KW-4000KW varies according to product size

4.2.3 Molybdenum alloy/Titanium alloy welding Tool Head (customized)

4.2.4 Working air source 0.5MPA-0.7mpa dry air source

4.2.5 Air supply pressure 4-6kgf /cm²

4.2.6 Heating Mode Pulse heating

4.2.7 Temperature feedback TYPE K thermocouple

4.2.8 Temperature range 0-500 (configurable)

4.2.9 Temperature error range is about ±1. Three stages of temperature can be set

4.2.10 Production efficiency 450-600pcs /H without considering human factors

4.2.11 Working environment 10-60 ℃

4.2.12 Operating humidity 40%-95% RH

Double position soldering machine GZC-MX400L features (safety grating optional) :

1. High precision ---- adopt yardeke adjustable stroke cylinder, high precision control of pressing depth;

2. High efficiency ---- double station welding, two stations can run at the same time without interference, greatly improve efficiency;

3. High stability -- Temperature control system adopts Japan RKC imported temperature control, stable welding temperature, no virtual welding;

4. High safety -- with alarm warning function, welding head temperature abnormal wire break, fall off, anti-freeze protection function;

5. Balance ---- Using u-shaped structure tool head balance adjustment method, the tool head can be left and right, before and after fine tuning;

6. Pressure adjustment ---- adopt new pressure following adjustment mechanism to improve welding quality;

Pulse hot pressing characteristics

Pulse soldering machine is mainly used for soldering operations on devices that cannot be welded using normal SMT+ reflow furnace, but using soldering iron

When welding, it is easy to appear the appearance of welding is inconsistent, uneven, easy to appear virtual welding and easy to weld bad products (skilled welding personnel

Training requirements are higher); The pulse soldering machine is different from the constant temperature soldering iron, pulse soldering machine can reach the desired temperature in the moment of power, and a

Denier welding head ends without voltage, can reach room temperature instantly; And the welding head is flat, so the appearance of the welding is flat and consistent, rarely out

Now the virtual welding is bad.

1, pulse heating technology, rapid heating, cooling;

2, with temperature correction/timely temperature compensation function, built-in hot head temperature overtemperature protection function;

3, 2 HD cameras can be independent up and down, left and right, front and rear three axis accurate fine-tuning, focusing, positioning;

4, equipped with color touch screen and high resolution LCD display, clear view of the position of the reheat pressing;

5, PLC programmable controller, can be customized according to the product requirements of various work procedures;

6, can replace different sizes of titanium alloy/molybdenum alloy indenter, hot pressing various types of products;

7, according to different product requirements to set parameters, configure different heating speed, hot pressing time, pressure, etc.;

8. The working table uses micrometer to adjust the three-axis fine-tuning positioning;

9, FPC line positioning, the platform can be designed according to the special positioning mold, and equipped with vacuum adsorption, to ensure yield.